If you have been reading about IGF-1 and want a single page that covers the useful parts, this is it: definitions, context, how it is studied, and the questions that come up repeatedly.
Updated 2025-10-20. Numbers and descriptions here follow the published literature rather than marketing material.
CJC-1295 is a synthetic analogue of growth hormone-releasing hormone, built on the 29-amino-acid GHRH(1-29) fragment. Four substitutions distinguish it from the natural sequence: D-alanine at position 2, glutamine at position 8, alanine at position 15, and leucine at position 27. These changes reduce enzymatic cleavage and extend the peptide's persistence in circulation. The compound is discussed in two forms, one carrying a drug affinity complex and one without it.
The drug affinity complex is a maleimidopropionic acid group attached to a lysine side chain. It reacts with the free thiol of cysteine-34 on circulating albumin, forming a covalent bond. This conjugation keeps the peptide in the bloodstream and shields it from rapid renal filtration and proteolysis. Reported circulation half-lives for the albumin-bound form fall in the range of roughly six to nine days in early human studies.
Binding to GHRH receptors on pituitary somatotroph cells triggers cyclic AMP signaling and stimulates growth hormone synthesis and release. Because the peptide acts upstream of the pituitary, effects are mediated through endogenous growth hormone rather than direct receptor activation in peripheral tissues. Increases in insulin-like growth factor 1 are generally described as a downstream consequence. Most published human exposure data come from small early-stage studies, and the clinical significance of the pharmacokinetic profile remains incompletely characterized.
Lyophilized material is generally stable for extended periods when held at minus twenty degrees Celsius or below and protected from moisture and light. In solution the peptide is more labile; bond hydrolysis, aggregation and oxidation of susceptible residues all proceed faster at ambient temperature. Repeated freeze and thaw cycles should be avoided because they promote clumping and loss of soluble material. The conjugated variant adds a further consideration, since the maleimide group can hydrolyze in aqueous buffer and lose its ability to react with albumin.
Laboratory handling centers on minimizing exposure to water, heat and oxygen before use. Working solutions are typically prepared in sterile water or a mild buffer, and any residual particulate matter is removed by filtration. When the powder dissolves slowly, a small proportion of acetonitrile or dilute acetic acid is sometimes added as a co-solvent. Containers are kept sealed and desiccated between uses. Records of lot number, reconstitution date and storage conditions support later comparison of results across experiments.
Identity and purity are established with reversed phase high performance liquid chromatography coupled to mass spectrometry. The chromatographic step separates the target peptide from truncated sequences and deletion products, while the mass measurement confirms the expected molecular weight to within a fraction of a dalton. Because the two common variants differ by the presence of the linker, mass alone can distinguish them in the unconjugated state. Amino acid analysis and peptide mapping are used when sequence level confirmation is required.
| Property | Value | Notes |
|---|---|---|
| Physical form | Lyophilized white powder | Supplied as a freeze-dried solid for research use |
| Molecular weight | Approximately 3,647 Da (DAC form) | Lower for the variant lacking the albumin-binding moiety |
| Solubility | Soluble in water and aqueous buffer | Typically dissolved in sterile or bacteriostatic water |
| Typical storage temperature | −20 °C or below | Dry powder, desiccated and protected from light |
| Common analytical method | Reversed-phase HPLC with mass spectrometry | Used for purity estimation and identity confirmation |
Reports on this compound commonly follow serum growth hormone and insulin-like growth factor 1 across defined time windows. Protocols differ in sampling frequency, assay platform, and participant characteristics, which makes direct comparison between publications difficult. Some work focuses on pulsatile release patterns instead of average concentrations. Whether repeated exposure alters endogenous hormone rhythms over long periods remains an open question, and the formal literature is thinner than the volume of informal commentary implies.
Once in circulation, the peptide binds the growth hormone-releasing hormone receptor displayed on pituitary somatotroph cells. Receptor activation couples to Gs proteins, elevates intracellular cyclic AMP, and drives protein kinase A signaling inside the cell. That cascade increases discharge of growth hormone into the bloodstream. The analog therefore operates through a receptor pathway that already exists for the body's own releasing hormone, rather than through an engineered artificial target.
Clearance profiles diverge sharply between the two versions. The albumin-binding molecule stays in plasma for several days, whereas the unmodified analog is largely gone within about half an hour in reported work. Cleavage by dipeptidyl peptidase IV is a major contributor to the short life of the unmodified sequence. These gaps mean the two versions cannot be substituted for each other in study design or in reading results side by side.
Two related peptides circulate under the CJC-1295 label, and they differ mainly in how long they persist in circulation. The version carrying a drug affinity complex includes a maleimidopropionic acid linker that forms a covalent bond with serum albumin. The other version, usually written as modified GRF(1-29) or tetrasubstituted GRF(1-29), lacks that linker and is cleared quickly. Mixing the two produces inconsistent readings of published half-life values, because the linker rather than the receptor-facing sequence drives most of the difference.
The core sequence keeps the receptor-binding region of GHRH while replacing four positions that are vulnerable to dipeptidyl peptidase-4 and other proteases. Substitutions at positions 2, 8, 15, and 27 raise metabolic stability relative to the natural hormone. The N-terminal residues remain essential for activity, so changes there generally lower potency. Molecular weight sits near 3368 daltons for the tetrasubstituted analog without the linker, while the albumin-binding form is heavier because of the added maleimide group.
Microscale manipulation and patterning of biological materials such as proteins, cells and tissues have been used in the development of cell-based arrays, microarrays, microfabrication based tissue engineering, and artificial organs. Biological micropatterning can be used for high-throughput single cell analysis, precise control of cellular microenvironment, as well as controlled integration of cells into appropriate multi-cellular architectures to recapitulate in vivo conditions. Photolithography, microcontact printing, selective microfluidic delivery, and self-assembled monolayers are some methods used to pattern biological molecules onto surfaces. Cell micropatterning can be done using microcontact patterning of extracellular matrix proteins, cellular electrophoresis, optical tweezer arrays, dielectrophoresis, and electrochemically active surfaces.
AAA proteins are divided into seven basic clades, based on secondary structure elements included within or near the core AAA fold: clamp loader, initiator, classic, superfamily III helicase, HCLR, H2-insert, and PS-II insert. AAA ATPases assemble into oligomeric assemblies (often homo-hexamers) that form a ring-shaped structure with a central pore. These proteins produce a molecular motor that couples ATP binding and hydrolysis to changes in conformational states that can be propagated through the assembly in order to act upon a target substrate, either translocating or remodelling the substrate. The central pore may be involved in substrate processing. In the hexameric configuration, the ATP-binding site is positioned at the interface between the subunits. Upon ATP binding and hydrolysis, AAA enzymes undergo conformational changes in the AAA-domains as well as in the N-domains. These motions can be transmitted to substrate protein.
Water chemistry analyses are carried out to identify and quantify the chemical components and properties of water samples. The type and sensitivity of the analysis depends on the purpose of the analysis and the anticipated use of the water. Chemical water analysis is carried out on water used in industrial processes, on waste-water stream, on rivers and stream, on rainfall and on the sea. In all cases the results of the analysis provides information that can be used to make decisions or to provide re-assurance that conditions are as expected. The analytical parameters selected are chosen to be appropriate for the decision-making process or to establish acceptable normality. Water chemistry analysis is often the groundwork of studies of water quality, pollution, hydrology and geothermal waters. Analytical methods routinely used can detect and measure all the natural elements and their inorganic compounds and a very wide range of organic chemical species using methods such as gas chromatography and mass spectrometry. In water treatment plants producing drinking water and in some industrial processes using products with distinctive taste and odors, specialized organoleptic methods may be used to detect smells at very low concentrations.
Chromosome 11 open reading frame 91, or C11orf91 is a protein which in humans is encoded by the C11orf91 gene. The C11orf91 gene consists of 5159 nucleotides with an mRNA of approximately 836 base pairs. There is one exon found in the C11orf91 gene. The cytogenetic band location of C11orf91 is 11p13 and is located on the minus strand of the DNA . Annotated depiction of the C11orf91 mRNA and amino acid protein sequences. The C11orf91 gene encodes a protein that is 193 amino acids in length. The C11orf91 protein contains a domain of unknown function, DUF5529, that spans nearly the entire protein. RBMX protein binding sites were found to be highly conserved in several structures of human C11orf91 3'UTR and 5' UTR. C11orf91 is rich in serine and proline and poor in valine and asparagine. There is a proline rich region found in the middle of the C11orf91. The human C11orf91 protein is approximately 20 kDal and has an isoelectric point around 9. Human C11orf91 protein is predicted to be localized in vesicles. C11orf91 has two helices located near the C-terminus and no beta sheets.
Sources: en.wikipedia.org
C-reactive protein (CRP) is an annular (ring-shaped) pentameric protein found in blood plasma, whose circulating concentration rises in response to inflammation. It is an acute-phase protein of hepatic origin that increases following interleukin-6 secretion by macrophages and T cells. Its physiological role is to bind to lysophosphatidylcholine expressed on the surface of dead or dying cells (and some types of bacteria) in order to activate the complement system via C1q. CRP is synthesized by the liver in response to factors released by macrophages, T cells and fat cells (adipocytes). It is a member of the pentraxin family of proteins. It is not related to C-peptide (insulin) or protein C (blood coagulation). C-reactive protein was the first pattern recognition receptor (PRR) to be identified.
{\displaystyle \langle \Psi _{nlm_{l}m_{s}}|\mu |\Psi _{n'l'm_{l}'m_{s}'}\rangle } For example in the E1 transition, unless Δ l = ± 1, Δ ml = 0 or ± 1, Δ ms = 0, and Δ n = any integer, the equation above will yield a value equal to zero and the transition would be known as a “forbidden transition”. For example, this would occur for certain cases like when Δ l = 2. In this case, the transition would not be allowed and therefore would be much weaker than an allowed transition. These specific values for the changes in quantum numbers are known as the selection rules for the allowed transitions and are shown for common transitions in the table below: Cold vapour atomic fluorescence spectroscopy Atomic spectral line Prospects in Analytical Atomic Spectrometry – tendencies in five main branches of atomic spectrometry (absorption, emission, mass, fluorescence and ionization spectrometry) Learning by Simulations – various atomic absorption and emission spectra Atomic Spectroscopy: A Compendium of Basic Ideas, Notation, Data, and Formulas
GCaMP is a genetically encoded calcium indicator (GECI) initially developed in 2001 by Junichi Nakai. It is a synthetic fusion of green fluorescent protein (GFP), calmodulin (CaM), and M13, a peptide sequence from myosin light-chain kinase. When bound to Ca2+, GCaMP fluoresces green with a peak excitation wavelength of 480 nm and a peak emission wavelength of 510 nm. It is used in biological research to measure intracellular Ca2+ levels both in vitro and in vivo using virally transfected or transgenic cell and animal lines. The genetic sequence encoding GCaMP can be inserted under the control of promoters exclusive to certain cell types, allowing for cell-type specific expression of GCaMP. Since Ca2+ is a second messenger that contributes to many cellular mechanisms and signaling pathways, GCaMP allows researchers to quantify the activity of Ca2+-based mechanisms and study the role of Ca2+ ions in biological processes of interest.
AHCC is widely used in the world and many people use it for general health maintenance and treatment of various diseases. It is often used as a complementary and alternative medicine (CAM) for immune support, as reports in animal and clinical settings have indicated that AHCC is associated with an enhanced response to infection and increased survival. AHCC is in some cases also used by those undergoing conventional cancer therapy (e.g. chemotherapy) for its reported immunomodulatory functions. In Japan, AHCC is the 2nd most popular complementary and alternative medicine used by cancer patients. Agaricus blazei supplements are the most popular, outpacing AHCC use by a factor of 7:1.
One mechanism through which BDNF appears to maintain elevated levels of neuronal excitation is through preventing GABAergic signaling activities. While glutamate is the brain's major excitatory neurotransmitter and phosphorylation normally activates receptors, GABA is the brain's primary inhibitory neurotransmitter and phosphorylation of GABAA receptors tend to reduce their activity. Blockading BDNF signaling with a tyrosine kinase inhibitor or a PKC inhibitor in wild type mice produced significant reductions in spontaneous action potential frequencies that were mediated by an increase in the amplitude of GABAergic inhibitory postsynaptic currents (IPSC). Similar effects could be obtained in BDNF knockout mice, but these effects were reversed by local application of BDNF. This suggests BDNF increases excitatory synaptic signaling partly through the post-synaptic suppression of GABAergic signaling by activating PKC through its association with TrkB. Once activated, PKC can reduce the amplitude of IPSCs through to GABAA receptor phosphorylation and inhibition. In support of this putative mechanism, activation of PKCε leads to phosphorylation of N-ethylmaleimide-sensitive factor (NSF) at serine 460 and threonine 461, increasing its ATPase activity which downregulates GABAA receptor surface expression and subsequently attenuates inhibitory currents.
Sources: en.wikipedia.org
The two share the same 29-amino-acid backbone. CJC-1295 carries an additional albumin-binding moiety that markedly extends its residence time in circulation, while the form without that moiety clears faster. Literature sometimes applies the name loosely to either variant.
It has not been approved by major regulatory agencies for any therapeutic indication. Material sold under this name is typically distributed for laboratory research only. Clinical use is not supported by large controlled trials.
Early human studies of the albumin-binding form reported circulation half-lives on the order of several days. The value depends on assay method and study design. Estimates for the form without the binding moiety are considerably shorter.
The mass difference from the linker is large enough for routine detection by mass spectrometry. The unconjugated form gives a single sharp signal at its expected weight. Material that has already reacted with albumin shows a much higher mass and a broadened chromatographic peak.